In order to ensure the safety of your pallet racking, it is important to choose the proper types of pallet racking protectors. There are several types of rack protectors available, including baseplates, column guards, and shock-absorbing rack guards. These protect the rack from damage by preventing forklifts from impacting the rack or lower leg.
Column guards
Column guards for pallet racking are a great way to protect your warehouse equipment against accidental damage. They protect your pallet racks from bumps caused by forklifts, which can lead to damaged products. Column guards are made of heavy-duty steel and are designed to deflect the impact from large machinery. They are available in a variety of sizes. These accessories can help you protect your pallet racking for years to come.
ThereĀ https://www.egaproducts.com/products/pallet-rack-post-protectors are two types of column protectors: those that clip on to upright columns and those that screw onto a frame. The former is designed to be easy to install and can be bolted onto the upright column. Column protectors can also be screwed into the floor surrounding the column. They are available in a wide variety of colors, and they can be custom-made to any height.
Baseplates
Baseplates for pallet racking protectors can protect upright posts from damaging impact. They can be installed without drilling and are designed to fit perfectly over the upright. These types of protectors are typically made of structural steel. They are available in several different heights and can accommodate different sized upright posts.
Baseplates are metal plates located at the foot of the upright frame. They increase the stability of the rack and allow it to support greater loads. They are designed with holes that vary from 3/8″ to 3/4″. These plates are usually thicker than upright frames and should be anchored to the floor. This is a crucial part of protecting your rack from being damaged during impact.
Some baseplates have additional holes to accommodate additional anchors. This allows you to re-anchor the baseplate if necessary. Baseplates may also have shims underneath them to compensate for cross-aisle flooring slopes. Shims should be no more than two times the anchor diameter.
Shock-absorbing rack guards
Shock-absorbing pallet racking guards are an excellent way to protect rack columns from accidental impacts. They are made from shock-absorbing rubber and have a half-moon profile that deflects impacts. They are typically fastened to the rack posts using a bolt or a band and can be mounted at every beam level.
Shock-absorbing rack guards are available in a variety of designs to meet your needs. They protect upright racks from collisions with forklifts or other equipment. Their half-moon shape deflects impacts to maintain upright integrity and the integrity of concrete floors. Most rack protectors are 10″ tall and are designed to fit uprights up to 4″ wide. Some are zinc plated to minimize maintenance costs.
Steel or rubber-armored metal column guards are another choice. They are made to fit many common pallet rack sizes and are more resistant to damage than welded bolt-down guards. These can be stackable for added protection. Bollards are also recommended by the Rack Manufacturers Institute and are often required by local building ordinances.